Leistung
2 x 60 PS

Technische Daten
Länge über alles: 18,20 m
Max. Breite: 9,10 m
Tiefgang: 1,25 m
Segelfläche: 143 m²
Dieseltank: 600 l
Wassertank: 700 l

Standardspezifikation
INTERIOR LAYOUT OF PORT HULL:
(from forward to aft)
1 Head:
• Molded sole/wall assembly including washbasin / toilet support / anti-skid sole
• Manual marine toilet
• Shower with foot drainage pump
• Topcoat interior finish
• General lighting by 1 neon
• Ventilation by 1 deck hatch
1 main companionway:
• Access to hull via very large deck hatch
• 1 large companionway ladder
• Topcoat paint finish
1 galley space:
• 1 stainless steel sink Ø 31 cm
• Galley with counter top + numerous stowage spaces to port
• Topcoat interior paint finish
• General lighting by neons
• Ventilation by 1 opening portlight + 1 escape hatch
1 double berth:
• Access direct to berth by 1 teak and stainless steel step from the galley space
• Double berth with 100 mm thick mattress above engine sole
• Topcoat interior paint finish
• Lighting by 1 neon
• Ventilation by 1 opening port-light

INTERIOR LAYOUT OF STARBOARD HULL
1 Head:
• Molded sole/wall assembly including washbasin / toilet support / anti-skid sole
• Manual marine toilet
• Shower with foot drainage pump
• Topcoat interior finish
• General lighting by 1 neon
• Ventilation by 1 deck hatch
1 main companionway:
• Access to hull via very large deck hatch
• 1 large companionway ladder
• Topcoat paint finish
1 Navigation station:
• 1 chart table
• Lighting by 1 reading light + 1 x 12 V outlet
• Shelves and technical panel including the electrical distribution switchboard
1 double berth:
• Access direct to berth by 1 teak and stainless steel step from the navigation station
• Double berth with 100 mm thick mattress above engine sole
• Topcoat interior paint finish
• Lighting by 1 neon
• Ventilation by 1 opening port-light
PLUMBING
• 2 freshwater tanks with electric gauges (2 x 350l)
• 2 cold water systems with 2 pressurized water pumps, linked together by cock
• 8 electric bilge pumps (2 m3 / h)

TECHNICAL COMPARTMENTS AND ENGINES
1 forward compartment:
• Located ahead of mast beam
• Freshwater tank
• Place for waste water holding tank (option)
• Interior finish without topcoat
• Lighting by 1 neon
Aft compartment:
• Located abaft the aft beam
• Access via large all aluminum deck hatch
• Lighting by 1 neon
Engine compartment:
• Access under sole of double berth
• High performance soundproofing
• Natural air inlet from deck
• Natural air extraction to deck
Engines and equipment:
• 2 x 62 hp engines
• Hydraulic gearbox, direct shaft drive, diameter Ø40mm
• PSS type rotating shaft seal
• 18x14 three-blade propellers
• Complete dual engine panels and controls at helm station

DECK PLATFORM
• 1 fixed helm station with large watertight locker underneath
• Large 45 m² flat platform fitted out to order
• 1 bar with awning
• 16 GRP 2-place seats
• Mast heel with 3 winches, windlass and towing cleat
• Chain locker with hatch cover ahead of mast foot
• Aft maneuvering platform with 3 winches, turning blocks and clutches

ELECTRICITY / ELECTRONICS
• 5 x 100 Ah batteries with cut-off switches
• General 12V distribution switchboard at chart table with circuit breaker protection
• Ammeter and voltmeter for battery condition
• Spare feeds for extra equipment
• Navigation instrument set with log, speed, depth, wind direction and wind speed with
complete display at helm station

RIG AND SAILS
Mast and boom:
• Aluminum mast and boom, plain anodized
• Complete standing rigging
• Ball bearing mainsail luff cars
• 1 x 2 strand mainsail halyard
• 2 jib halyards
• 1 spinnaker / gennaker halyard
• 1 boom topping lift
• 3 reef lines
• 2 lazy-jacks
• 2 flag halyards
• clutches on all halyards, reef lines and topping lift
• 1 jib halyard tightener
• 1 size 48 self-tailing winch for spinnaker / gennaker halyards and reef lines
• Running, steaming and anchor lights
• Deck light
Forward beam / net:
• 1 forward beam with bridle (finish to be defined)
• 2 compression beams with pivoting disembarking gangplank between the two
• 2 nylon nets, mesh 40 x 40 mm green
Sails:
• 1 rounded roach mainsail 98 m² with battens
• Solent jib 45 m²
• Proengin jib roller furler
• 1 sail repair kit

FITTINGS
Mainsail:
• 1 mainsheet tackle
• 1 size 58 self-tailing winch for mainsheet
• Ball bearing mainsheet traveler
• 2 traveler trimming tackles with clutches
• 2 size 48 self-tailing traveler winches

Jib and staysail:
• Self-tacking jib track
• 1 size 64 self-tailing winch for jib sheet
• Furling line led aft under forward net as far as mast heel
Other equipment:
• Complete steering system with Ø 1030 mm leather rimmed wheel
• Emergency tiller
• 1 steering compass
• 3 winch handles + 3 pockets
• Rigid guardrail h=1.00m on the sides of passenger platform (between mast beam and aft
beam)
• Stanchions + 2 level wire guardrails forward of mast beam with pulpits
• 2 accommodation gates in transom skirts
• Pushpit with access to skirts on either side of the hull
• 7 mooring cleats
• 12V 1700 watts electric windlass
• Anchor exits under chain locker with integral bridle
• Mooring roller on forward beam
• 1 exterior manual bilge pump
• 2 swim ladders built into transom skirts + 4 handrails
• 2 cold water shower fittings in transom skirts
• 2 white lacquered aluminum tender davits (maximum static load 300 kg),
with 2 x 3
strand tackles, 2 clutches, led back by blocks on pad-eyes to mainsheet traveler winches
• Rubbing strake all round exterior of hulls
• 2 coats antifouling

Preis: weiter >